Setting up
NOTE
During set-up, first insert the batteries into the
outdoor sensor and then into the temperature
station .
Requirements for the set-up location
CAUTION
►
When selecting the installation location,
ensure that the appliances are not sub-
jected to direct sunlight, vibration, dust,
heat, cold and moisture .
►
Do not set the appliance up in the vicinity
of heat sources such as radiators .
►
Fit the outdoor sensor at a maximum
distance of 30 m from the temperature
station . Ensure that there are no disruptive
obstacles between the outdoor sensor
and the temperature station . Otherwise,
transmission can be disrupted .
♦
Both the temperature station and the
outdoor sensor can be suspended from
a screw using the hangers 7 and t .
♦
Alternatively, you can fold out the stands w
and p of the temperature station and the
outdoor sensor to place them on a horizon-
tal and level surface .
AFT 77 A1
GB │ CY
│
■
9