Operation - Eldom smil HT82N Bedienungsanleitung

GENERAL DESCRIPTION
1. On/Off switch with power
settings
2. Feeding cord
3. Hang up loop
4. Folding handle
5. Air inlet
6. Concentrator

OPERATION

The hairdryer is intended for drying hair.
Before connecting the appliance to the power supply, make sure that the switch (1)
is set to „0" position.
After connecting to the power supply, of parameters indicated in the instructions,
turn on the appliance with the switch (1).
0 position - the dryer is off.
1 position - low speed.
2 position – high speed.
The concentrator (6) helps to style hair. The hairdryer can be used without the
concentrator. The folding handle (4) helps with storage.
CLEANING AND MAINTANANCE
- Before cleaning unplug the hair-dryer and wait until it cools down completely.
- Never immerse the hair-dryer in water.
- Casing and power cord can be cleaned with soft dry or slightly damp cloth.
- The air inlet and outlet should be cleaned with soft brush.
OPERATING INSTRUCTION
HAIR DRYER HT82N / HT82R
TECHNICAL DATA
- rated power 1200 W
- supply voltage:
220-240 V, ~50 Hz
EN
9 EN