Switching On/Off; Switching On/Off With The On/Off Button; Switching On/Off Via Vehicle Ignition; Setting The Switch-Off Time (Hour) - Bosch Dover USB40 Bedienungs- Und Einbauanleitung

32 | en
Once the time has been confirmed, the device
switches into normal operating mode.
7 620 000 120 - 123 | 10.2010
CODE theft protection | Switching on and off

Switching on/off

There are various ways of switching the device
on/off:
Switching on/off with the On/Off
button
f Press the On/Off button 3 to switch on.
f To switch the device off, press and hold
down the On/Off button 3 for longer
than two seconds.
Note:
To protect the vehicle battery, the
device is automatically switched off
after an adjustable time period if the
vehicle ignition is switched off (see
the section "Adjusting the switch-off
time" in this chapter).
Switching on/off via vehicle igni-
tion
If the device is connected to the vehicle's
ignition and you did not switch the device off
by pressing the On/Off button 3 , it is
switched on or off with the vehicle ignition.

Setting the switch-off time (HOUR)

f Press the MENU 5 button to open the
menu.
f Press the MENU 5 button repeatedly
until "HOUR" appears on the display along
with the current setting.
f Turn the volume controller 1 to the left
or right in order to set the switch-off time
to between 1 and 60 minutes.
Robert Bosch Car Multimedia GmbH