Philips 29PT902012 Bedienungsanleitung Seite 8

Auto Surround
Sometimes the broadcaster transmits special
signals for Surround Sound encoded
programmes.The TV automatically switches to
the best surround sound mode when
Surround
Set/Change code
The Child lock feature (see TV, Features, p. 11)
allows you to lock channels to prevent others
from watching certain programmes.To watch
locked channels, a 4-digit code must be
entered.The Set/Change code menu item
allows you to create or change a Personal
Identification Number (PIN).
&
Select
é If no code exists yet, the menu item is set to
Set code.
If a code has previously been entered, the menu
item is set to
instructions on screen.
Source
Setup
This menu allows you to indicate the peripheral
you connected to one of the external inputs.
Decoder
Setup
If a decoder or a descrambler is connected, see
p. 15, you can define one or more programme
numbers as decoder programme numbers.
& Select
é
Select
8
Downloaded from www.Manualslib.com
is switched On .
Set/Change code .
Change code . Follow the
Source
EXT1
EXT2
EXT3
SIDE
Decoder
Programme
Status
with the cursor right.
Decoder
Programme .
manuals search engine
Important:You have forgotten your code !
&
Select
Change code
press .
OK
é
Press the cursor right and enter the overriding
Auto
code 8-8-8-8.
"
Press the cursor again and enter a new
personal 4-digit code.The previous code is
erased and the new code is stored.
&
Press the cursor right to enter the list of types
of peripherals attached to the selected input.
é
Select the peripheral device with the cursor
up/down.
Once you have selected the source type, e.g. DVD,
this source will automatically be selected when
your remote control is in DVD mode, see p. 3, and
when you press the v key on the remote
control.
" Select the programme number under which
you have stored the programme coming from
your decoder.
'
Select Status
• Select the input used to connect your
decoder: None
• Select
None
programme number being activated as a
decoder programme number.
Note: Select
to your EasyLink video recorder.
in the General menu and
.
, or .
EXT1 EXT2
if you do not want the selected
when the decoder is connected
EXT2