Topcom KIDZZZ BABYTALKER 2500 Bedienungsanleitung Seite 8

Topcom Babytalker 2500
5.6 Lullaby
5 lullabies can be played on the baby unit.
5.6.1 Remote activation:
• Press
• Press
• Press
• Press
• Press
• Press
after the other.
• Press
• Select 'Play' and press
• To remotely deactivate the Lullaby, follow the same instructions, but select 'Stop'.
The audio level of the played lullaby can only be adjusted on the baby unit. The baby
unit will remember the set audio level.
If you press
5.6.2 Local activation:
• Press
• Press
• Press
• Press
5.7 Temperature
In standby mode, the room temperature of the baby unit is displayed on the parent unit.
5.7.1 Temperature range
The display will indicate when the room temperature has exceeded the upper of lower limit.
• Press
• Press
• Press
• Press
• Press
• Press
• Press
• Press
When the limits are exceeded the display will show 'High' of 'Low' and the temperature will
flash.
8
Downloaded from www.Manualslib.com
(8) on the parent unit, 'Night Light' is displayed.
(11) until 'Lullaby' is displayed.
(4). 'Play' is displayed.
(11) to select 'Select New'
(4).
(11) to select the desired Melody or select 'Play All' to play all lullabies one
(8) to leave the melody setting.
(4) to start the lullaby.
(3) on the parent unit, the lullaby will automatically stop.
PTT
(20) on the baby unit. The actual selected lullaby is played.
(24) to increase the audio level or
(21) to select the desired lullaby.
(20) to stop playing.
(8) on the parent unit, 'Night Light' is displayed.
(11) until 'Temperature' is displayed.
(4). 'Set Range' is displayed.
(4).
(11) or (10) to select the desired upper limit (max 26°C).
(4).
(11) or (10) to select the desired lower limit (min 14°C).
(8) to leave the range setting.
manuals search engine
(23) to decrease the audio level.
Topcom Babytalker 2500