Power Management - Sharp LL-T1610W Bedienungshandbuch

The digital signal input connector pin
No. Function
1 TMDS data 2-
2 TMDS data 2+
3 TMDS data 2 shield
4 N.C.
5 N.C.
6 DDC clock
7 DDC data
8 N.C.
9 TMDS data 1-
10 TMDS data 1+
11 TMDS data 1 shield
12 N.C.

Power management

The monitor is based on the VESA DPMS*1 and the DVI
DMPM*2 standards.
To activate the monitor's Power Management function,
both the video card and the computer must conform to
the VESA DPMS standard and the DVI DMPM standard.
*1 DPMS: Display Power Management Signalling
DPMS mode
ON
STANDBY
SUSPEND Display off
OFF
*2 DMPM: Digital Monitor Power Management
DPMS mode
ON
OFF
Downloaded from www.Manualslib.com
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
(DVI-D connector with 24 pins)
No. Function
13 N.C.
14 +5V
15 GND
16 Hot plug detection
17 TMDS data 0-
18 TMDS data 0+
19 TMDS data 0 shield
20 N.C.
21 N.C.
22 TMDS clock shield
23 TMDS clock +
24 TMDS clock -
Screen Power H-sync V-sync
consumption
Display on 32W Yes
No
1.5W Yes
No
Screen Power
consumption
Display on 32W
Display off 3W
manuals search engine
Specifications
DDC (Plug & Play)
This monitor supports the VESA DDC (Display Data
Channel) standard.
DDC is a signal standard for carrying out Plug & Play
functions on the monitor or PC. It transfers information
such as degree of resolution between the monitor and
PC. You can use this function if your PC is DDC compli-
ant and if it is set so that it can detect the Plug & Play
monitor.
There are many varieties of DDC due to the differences
between systems. This monitor works with DDC1 and
DDC2B.
Yes
Yes
No
No
29