OPERATION
Change a set cooking time
Cooking time can be changed during operation.
1. Touch the timer key as many times as necessary, to select the cooking zone of which you
want to adjust the time.
The zone is identified by a indicator light adjecent to the timer display.
▷
The time flashes in the display.
▷
2. Move your fingertip along the slide control to adjust the time.
Check the remaining cooking time
The different timer settings are shown clockwise in turn in the display.
1. Touch the timer key and continue to touch the key, to select the cooking zone to check the
time remaining.
The zone is identified by a indicator light adjacent to the timer display.
▷
The timer display shows the remaining time.
▷
Stop the timer
How to stop the timer before the end of set time:
1. Touch the timer key and continue to touch the key, to select the cooking zone for which you
want to stop the timer.
2. Move your fingertip along the slide control to set the timer to '00'.
The indicator light adjacent to the timer display goes Off.
▷
Start the Automatic heat-up function
1. Put the hob in standby mode and select a cooking zone.
2. Touch and hold the slide control until an 'A' shows in the display. Move your fingertip along
the slide control to set a power level.
'A' and the set power flash in the display.
▷
Pause cooking
(see pause function)
1. Touch the pause key.
The indicator light above the pause key and the power levels flashes.
▷
EN 15