ASROCK H310M-DGS Handbuch Seite 21

Chassis Intrusion and
Speaker Header
(7-pin SPK_CI1)
(see p.1, No. 14)
Serial ATA3 Connectors
(SATA3_0:
see p.1, No. 10)
(SATA3_1:
see p.1, No. 11)
(SATA3_2:
see p.1, No. 8)
(SATA3_3:
see p.1, No. 9)
USB 2.0 Header
(9-pin USB_5_6)
(see p.1, No. 7)
USB 3.1 Gen1 Header
(19-pin USB3_3_4)
(see p.1, No. 6)
DUMMY
SPEAKER
GND
DUMMY
DUMMY
SIGNAL
+5V
1
DUMMY
GND GND
P+ P+
P- P-
USB_PWR USB_PWR
1
Vbus Vbus
Vbus IntA_P3_SSRX-
IntA_P2_SSRX- IntA_P3_SSRX+
IntA_P2_SSRX+ GND
GND IntA_P3_SSTX-
IntA_P2_SSTX- IntA_P3_SSTX+
IntA_P2_SSTX+
GND
GND IntA_P3_D-
IntA_P2_D- IntA_P3_D+
IntA_P2_D+
ID
1
Please connect the
chassis intrusion and the
chassis speaker to this
header.
These four SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
There is one USB
2.0 header on this
motherboard. This USB
2.0 header can support
two ports.
There is one header on
this motherboard. This
USB 3.1 Gen1 header can
support two ports.
H310M-DGS
19