Battery Removal Instructions - Philips AVENT SCF398 Handbuch

- This symbol means that this product contains a built-in rechargeable battery which shall not be
disposed of with normal household waste (2006/66/EC). Please take your product to an official
collection point or a Philips service center to have a professional remove the rechargeable battery.
- Follow your country's rules for the separate collection of electrical and electronic products and
rechargeable batteries. Correct disposal helps prevent negative consequences for the environment
and human health.

Battery removal instructions

- When you handle batteries, make sure that your hands, the product and the batteries are dry.
- To prevent batteries from heating up or releasing toxic or hazardous substances, do not modify,
pierce or damage products and batteries and do not disassemble, short-circuit, overcharge or
reverse charge batteries.
- To avoid accidental short-circuiting of batteries after removal, do not let battery terminals come
into contact with metal object (e.g. coins, hairpins, rings). Do not wrap batteries in aluminum foil.
Tape battery terminals or put batteries in a plastic bag before you discard them.
- If batteries are damaged or leaking, avoid contact with the skin or eye. If this occurs, immediately
rinse well with water and seek medical care.
Note: Only remove the rechargeable battery when you discard the product. Before
you remove the battery, make sure that the product is disconnected from the wall socket
and that the battery is completely empty.
Note: Take any necessary safety precautions when you handle tools to open the
product and when you dispose of the rechargeable battery.
1. Remove the rubber
feet from the bottom of
the motor unit.
2. Remove the screw
with a torx screwdriver.
3. Open the motor unit
by pressing at the sides
of the device.
English
4. Disconnect the
connectors from the
printed circuit board.
23