Yukon Photon RT Betriebsanleitung Seite 13

Time setup
Enter the submenu with a brief press of the controller.
Time format is displayed as: "format mm/hh" (24 06:51)
Rotate the controller to select the required time format - 24/AM/PM. To set the hour value, briefly press the
controller .
Rotate the controller to select the hour value (clockwise to increase the value; counterclockwise to
decrease the value).
To set the minute value, briefly press the controller.
Rotate the controller to select the minute value (clockwise to increase the value; counterclockwise to
decrease the value).
To save the time settings and to exit the submenu, press and hold down the controller for more than one
second.
Current time in the format selected is shown on the display.
The set value is saved.
When the unit is next switched on, the display shows the last saved value.
Sound record activation
This menu option allows you to activate/deactivate sound recording only during video recording.
Enter the submenu with a short press of the controller.
Use the navigation buttons to select one of the options:
Yes – to activate sound recording.
No – to deactivate sound recording.
Confirm your selection with a short press of the controller.
When activating sound recording, the
deactivated.
The sound record icon is shown on the display in the VIDEO and PHOTO modes.
The set value is saved.
When the unit is next switched on, the display shows the last saved value.
19
icon appears on the display. Icon is shown when sound is
Selection of reticle shapes
Enter the main menu with a long press of the controller.
Enter the submenu "Reticle type" rotating the controller.
Select the desired reticle shape out of the list of 6 reticles rotating the controller.
The reticle types change as the cursor goes down the reticle list.
Confirm you selection with a short press of the controller.
When changing the digital zoom, the reticle does not change.
To exit menu, keep the controller pressed for two seconds or wait 10 seconds to exit automatically.
The list of available reticles can be found at www.yukonopticsglobal.com
Selection of reticle color
Enter the main menu with a long press of the controller.
Enter the submenu "Reticle color" rotating the controller.
Rotate the controller to select the required reticle colour (black (B), white
controller to confirm your choice.
Confirm you selection with a short press of the controller.
To exit menu, keep the controller pressed for two seconds or wait 10 seconds to exit automatically.
One shot zeroing
The riflescope features "one shot" zeroing method. Zeroing should be done at operating temperatures,
by following the order of these steps:
Mount the rifle with the sight installed on a bench rest.
Set a target at a distance of about 100m.
Adjust the riflescope according to the instructions of section "OPERATION".
(W), red (R) or green (G)). Press the
20