Additional Safety Instructions For Concrete Mixers; Correct Use According To Manufacturer´s Instructions; Residual Risks; Electrical Connection - Scheppach MIX160 Original Bedienungsanleitung

• All protection and safety devices must be reacti-
vated after the repair and servicing jobs have been
completed.
• Switch the motor off when leaving the workplace.
Pull out the power plug!
• Ensure that there is adequate illumination.
• In case of danger, switch off the machine and pull
out the power plug!
• Never put your hands on moving parts of the ma-
chine, when the machine is inoperation.
Please note that our equipment has not been de-
signed for use in commercial, trade or industri-
al applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Additional safety instructions for
concrete mixers
• The concrete mixer should be commissioned only
after it is fully installed.
• Check the connecting cables for damage before
start-up.
• Wear safety shoes, gloves, protective glasses and
respirator masks.
• Keep hands and feet away from moving parts.
• Do not put your hands into the running mixing drum.
• Do not insert any object into the running mixing
drum e.g., shovel etc.
• Risk of physical injury when mixing drum is rotat-
ing.
• The concrete mixer should be operated only with
original spare parts.
• Repairs on the concrete mixer should be performed
only by authorised technicians.
• Do not leave an operation-ready concrete mixer
without supervision.
• Switch the machine off and pull the power plug out
before leaving the workplace.
5. Correct use according to
manufacturer´s instructions
The machine corresponds to the applicable EC
Machine Directive.
• The concrete mixer is intended exclusively for pri-
vate use at home and in the garden.
• It should be operated only within the framework of
the technical data.
• The concrete mixer is meant exclusively for the pro-
duction of concrete and mortar.
• The applicable accident prevention rules and the
other generally recognised technical safety regula-
tions must be observed.
20 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
• The machine may be used, serviced or repaired
only by persons who are familiar with it and are in-
structed about its risks. Arbitrary alterations in the
machine will free the manufacturer from any liability
for the resulting damage.
• The machine is to be used only with the manufac-
turer's original accessories and original tools.
• Any use that goes beyond this will be treated as
improper use. The manufacturer will not be respon-
sible for damage resulting from improper use; the
risk will be borne solely by the user.
m Caution! The Following Actions are Forbidden:
• Operation in atmosphere that is exposed to the
risk of explosion
• Use in the food products industry
• Mixing explosive, combustible and health-en-
dangering substances.
m Warning! This electric tool generates an electro-
magnetic field during operation. This field can impair
active or passive medical implants under certain
conditions. In order to prevent the risk of serious or
deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operat-
ing the electric tool.

6. Residual risks

The machine is built on the basis of the latest
technology and in accordance with the recog-
nised technical safety rules. Nevertheless, indi-
vidual residual risks can occur while working.
• Risk of injury from rotating parts
• Risk from power where improper electrical con-
necting cables are used
• Further, indeterminate residual risks may remain
even after taking all relevant preventive measures.
• Residual risks can be minimised if the safety in-
structions and conditions for proper use, as well as
the operating instructions, are observed

7. Electrical connection

The installed electric motor is connected in opera-
tion-ready condition. The connection corresponds to
the common VDE and DIN provisions.
The customer-side mains connection, as well as
the used extension cable, must correspond to these
specifications.
m Important Instructions
In case of overload, the motor is switched off auto-
matically.
The motor can be activated again after a cooling pe-
riod (different times for different models).