For EU product versions and/or in case that it is
aning
requested in your country:
Ecology and recyclability of the product
vents
- The materials of which the packaging of this appliance
e.
consists are included in a collection, classification and
other
recycling system. Should you wish to dispose of them,
use the appropriate public recycling bins for each type
iness,
of material.
t the
- Respect the environment and do not throw used
ecome
batteries into your domestic rubbish, place them in
Authorised collection places. They should never be
thrown onto a fire.
- At the end of the product's useful life, and before
lly for
throwing it away in a container suitable for Electrical
Appliances and Electronics Waste, remove the batteries
and throw them away in the appropriate container.
- The product does not contain concentrations of
substances that could be considered harmful to the
environment.
upport
- This appliance contains, or could contain, oil.
se. Do
Remember that one should abide by the regulations
s this
concerning the elimination of this type of contaminant.
ed, it
would
- This symbol means that in case you
wish to dispose of the product once its
36K
working life has ended, take it to an
authorised waste agent for the selective
3.6
collection of Waste from Electric and
1.3
Electronic Equipment (WEEE).
180
6
16+1
yes
5
0.4
< 80
< 12
thetic
Double insulation
ithout
- This symbol means that user
must to consult instructions
thoroughly before use.
Protect electrical power tool
from moisture
- This symbol means that product may
include a battery or batteries; user must
to remove them before disposing of the
product. Remember that batteries must be
disposed of in duly authorised containers.
Do not dispose of them in fire.
How to remove the batteries from the interior of the
device: (Fig 5, 6)
CAUTION: It is important that the batteries are fully
discharged prior to its withdrawal from the apparatus.
To remove the batteries, once the life of the appliance,
proceed as follows:
- Open the handle shell of the apparatus, removing
previously with the help of a screwdriver fixing screws
(Fig 5)
- Identify the battery wires and cut their (Red and Black).
To avoid risks of a short circuit with a possible residual
battery load, first cut the Red wire and protect it by
using insulating tape, then proceed to cut the Black
wire proceeding in the same way. (Fig 6)
- Safely remove the battery from its housing.
Declaration of conformity
We hereby declare, under our own responsibility, that
the CASALS product described in this manual VDSLI36
/ VDSLI36K comply with the following standards: EN
60745, EN 55014 and EN 61000-3 in accordance with
EU Directives 2006/95/EC, 2004/108/EC, 2006/42/EC.
Alberto Tomas.
Commercial Manager