Thorens Td 907 - THORENS 900-Serie Bedienungsanleitung

®
THORENS TD 907
Mode of operation Manual
Drive system Precision-machined fl at belt (inside)
Motor Newly developed, fully electronically controlled and stabilized AC
synchronous motor. Plinth-mounted control board. Fine adjust-
ment of speed.
Speeds 33 1/3, 45 rpm
Speed change Electronic
Platter 1.5-kg aluminium sub-platter, 1.8-kg aluminium/acrylic outer
platter
Damping Polypropylene conical membrane between platter bearing and
chassis strut, pneumatic, adjustable
Base plate triCom
Tonearm board triCom
Tonearm THORENS
10" tonearms on request
Anti-skating Magnetic
Power supply External NT 900 electronic unit, 230/115V, 50/60 Hz
Connectors 2 x RCA unbalanced, 2 x XLR balanced, 1 earth post,
1 mains terminal
Dimensions (W x D x H) 470 x 380 x 190 mm
Weight 10 kg
Finishes White or anthracite structured enamel, Zebrano
Newly developed, ten-step adjustable
pneumatic damping architecture
A conical polypropylene membrane under the
platter bearing is decoupled from the triCom
base via a visco/propylene layer. The air cham-
ber thus formed under the membrane vents into
ten apertures in the base plate which can be
opened or closed with a slide.
®
TP 92/10". Optional: SME M2, SME 309 or other
Tonearm board made of triCom
The tonearm board is also made of tri-
Com and can be cut for almost any 9"
and 10" tonearm at the factory.
The ultimate sub-chassis turntable | Tradition reinterpreted
Three-part platter
The polished aluminium platter features
an acrylic insert that acts as a damping
pad for the grooved area of the record.
Tonearm connection options
Standard:
mini 5-pin DIN soldered to RCA/XLR
Option:
soldered directly to RCA/XLR terminals