Telestar M 12i Bedienungsanleitung Seite 100

4. OVERVIEW OF OPERATION ELEMENTS
9. Volume adjuster, confirmation button
Use the knob to change the volume or press the button to confirm
menu entries.
10. Back
E
Press this button to go back one step in the menu.
11. USB connection
Connect the device to a USB data carrier to update the firmware if
necessary. The port can also be used to charge a USB device. The
maximum charge current is 1 A.
Or connect a USB data carrier here such as
a USB hard drive or USB stick to play music files from
here or to record a radio programme.
12. Headphone jack
Insert headphones here to listen to the music
played back from the radio through your headphones.
If headphones are connected, music playback via the device's
speakers is interrupted.
13. AUX IN
Connect an external audio source here such as an MP3 player,
smartphone or tablet with a 3.5mm AUX cinch cable (also consult
chapter 8.8)
14. Power supply connection
Use this to connect the device to the power unit (included).
Operating Manual 100