Soundconnect - Samsung HW-H430 Bedienungsanleitung

functions
Bluetooth POWER on (Bluetooth POWER)
When the Bluetooth Power On function is on and the Soundbar is turned off, if a previously paired Bluetooth device tries to
pair with the Soundbar, the Soundbar turns on automatically.
• Press the Bluetooth POWER button on the Soundbar remote control.
• BLUETOOTH POWER ON appears on the Soundbar's display.
To disconnect the Bluetooth device from the Soundbar
You can disconnect the Bluetooth device from the Soundbar. For instructions, see the Bluetooth device's user manual.
• The Soundbar will be disconnected.
• When the Soundbar is disconnected from the Bluetooth device , the Soundbar will display BT DISCONNECTED on the
front display.
To disconnect the Soundbar from the Bluetooth device
Press the (SOURCE) button on the remote control or the (
another mode or turn off the Soundbar.
• The connected Bluetooth device will wait a certain amount of time for a response from the Soundbar before terminating the
connection. (Disconnection time may differ, depending on the Bluetooth device)
• The currently connected device will be disconnected.
▪
In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar and the
Bluetooth device exceeds 5m.
▪
If the Bluetooth device comes back into the effective range after disconnecting, you can restart the Soundbar to
restore the pairing with the Bluetooth device.
▪
The Soundbar automatically turns off after 25 minutes in the Ready state.

SOUNDCONNECT

This section explains how to connect the Soundbar to a Bluetooth compatible SAMSUNG TV.
To connect the Soundbar to a Bluetooth compatible Samsung TV
Press the button to select the TV mode, and then connect the TV to the Soundbar.
• The unit will play the TV's audio when it is connected to the TV.
• If you change to another mode, except the TV Soundconnect mode, or turn off the Soundbar, you will hear
audio from the TV again.
16
) button on the product's side panel to switch from BT to
Connect