Advanced Functions; Usb Function; Usb Recording - Samsung HT-D330 Bedienungsanleitung

Advanced Functions

USB Function

Playing Media Files using the
USB Host Feature
You can enjoy media fi les such as pictures, movies
and music saved on an MP3 player, USB memory
stick or digital camera in high quality video with 5.1
channel sound by connecting the storage device to
the USB port of the product.
1. Connect the USB device to the USB port on the
front panel of the product.
2. Press the FUNCTION button to select USB.
•
USB appears on the display screen and then
disappears.
Press the ◄► buttons to select Videos, Photo
3.
or Music.
- Select a fi le to play.
Safe USB Removal
To prevent damage to the memory stored in the
USB device, perform safe removal before
disconnecting the USB cable.
•
Press the YELLOW(C) button.
- REMOVE will appear on the display.
•
Remove the USB cable.
✎
NOTE

To listen to your music fi les with 5.1 channel
sound, you must set the Dolby Pro Logic II
mode to Matrix. (See page 25)

Remove the USB cable from the USB port
slowly. Otherwise, it may cause damage to the
USB port.
26
English
HT-D330-XU_ENG-1228.indd 26 HT-D330-XU_ENG-1228.indd 26
While playing CD-DA (Compact Disc Digital Audio)
using the USB Recording function, you can record the
audio source in the USB memory.
1. Connect the USB device to your product.
2. Insert the CD-DA disc into the CD tray.
3. Press the USB REC button on the
remote control.
•
To start ripping the current track,
press the USB REC button on the
remote control while the system is playing a track
or stopped temporarily.
5V 500mA
•
To record the entire CD, press and hold the USB
REC button on the remote control.
- "FULL CD RIPPING" appears on the display and
recording starts.
4. Press the STOP () button to stop recording.
•
When USB recording of a CD is completed, you
will fi nd a new folder named "RECORDING" in the
USB drive. The contents will be saved in the folder
in the MP3 format.
✎
NOTE

Do not disconnect the USB connection or the power cable
during the USB Recording. Otherwise, it may cause
damage to the data.
To stop USB Recording, press the STOP button and
disconnect the USB device after the system stops playing
the CD completely.

If you disconnect the USB connection during the USB
Recording, the system will turn off and you will not be able
to delete the recorded fi le.

If you connect the USB device to the system while it is
playing a CD, the system stops temporarily and will play
again.

DTS-CDs cannot be recorded.

If the recording duration is less than 5 seconds, a recording
fi le may not be created.

USB Recording works only if the USB device is formatted in
the FAT fi le system. (The NTFS fi le system is not
supported.)

The audio signal will not be output during USB recording of
the CD.

USB Recording

2011-12-28 2011-12-28 12:00:46 12:00:46