YT Industries JEFFSY PRIMUS Bedienungsanleitung Seite 11

Place the rear wheel in the frame. Make sure
5.1
to place the chain on the smallest cog of the
cassette. Carefully pull the shifter rearwards
to make the insertion easier.
By pulling out the lever you can change its
5.4
position. The lever should be pointed to the
front alongside the seat stays to avoid being
damaged.
REAR WHEEL ASSEMBLY
Insert the axle to the very end and tighten it
5.2
clockwise afterwards.
Press the derailleur cage forwards to release
5.5
the CAGE LOCK. Once released, carefully
guide the cage rearwards until it puts tension
on the chain.
Tighten the rear axle fi rmly by hand with around
5.3
10 – 15 Nm torque.
Pl ea se f ol l ow th e
torque spe cif i cat ions of
the ma nufacture rs:
Rear wheel axle // 10 – 15 Nm
y t 1 1