Using The Device; Venting And Start Up Of The Device - MS Schippers Digi Doser Di-O 10 Gebrauchsanweisung

Figure 2.3: Mounting the suction hose
3. U
SING THE DEVICE

3.1 Venting and start up of the device

 Start the pump and set the correct dosage.
 Place the suction hose in the pre-solution.

Connect the supplied syringe with the additional hose to the venting valve.

Open the venting valve at the pump head (picture 3) and suck the air from the system with the supplied syringe
and hose until some liquid runs into the syringe (picture 4).

Close the venting valve.

Start the pump and press the right arrow button for 5 seconds, the system dispenses for 30 seconds
continuously, so the whole system is filled with Di-O-Clean.

The system is now ready to use.
Picture 2
Picture 1: Adapter container
Picture 3
17