Ryobi RLM4614SME Übersetzung Der Originalanleitung Seite 4

entire grass catcher or self-closing discharge opening
guard in place.
Do not use the lawn mower when there is a risk of
lightning.
Do not force the product. It will do the job better and
safer at the speed for which it was designed.
Do not overload your mower. Mowing long thick grass
may cause the motor speed to drop, or the power to cut
out. When mowing in long thick grass a first cut with the
cutting height set higher will help reduce the load. See
adjusting the blade height.
Stop the blade when crossing gravel surfaces.
Do not pull the mower backward unless absolutely
necessary. If you must back the machine away from a
wall or obstruction, first look down and behind to avoid
tripping or pulling the machine over your feet.
Stop the blade(s) if the machine has to be tilted for
transportation when crossing surfaces other than grass,
and when transporting the machine to and from the
area to be mowed.
Never operate the machine with defective guards
or shields, or without safety devices, for example
Start the engine carefully according to instructions and
keep hands and feet away from cutting area. Keep clear
of the discharge opening at all times.
Never pick up or carry a lawn mower while the engine
is running.
Avoid holes, ruts, bumps, rocks, property stakes, or
other hidden objects. Uneven terrain could cause a slip
and fall accident.
When not in use, mower should be stored in a well-
ventilated, dry, locked up place-out of the reach of
children.
Follow manufacturer's instructions for proper operation
and installation of accessories. Only use accessories
approved by the manufacturer.
Do not operate the engine in a confined space where
dangerous carbon monoxide fumes can collect.
Do not change the engine governor settings or over-
speed the engine.
Do not tilt the lawn mower when starting the engine or
whilst the engine is running. This exposes the blade
and increases the probability of objects being thrown.
Do not start the engine when standing in front of the
discharge chute.
Stop the engine, disconnect the spark plug wire, and
wait until the blade comes to a complete stop and allow
it cool before for the below case:
whenever you leave the product unattended
before cleaning a blockage or unclogging chute
before checking, cleaning or working on the product
after striking a foreign object; inspect the appliance
for damage and make repairs as necessary before
restarting and operating the machine.
2
before clearing the grass catcher
If the product starts to vibrate abnormally (check
immediately)
inspect for damage
replace or repair any damaged parts
check for and tighten any loose parts
If the machine strikes a foreign object, follow these
steps:
Stop the mower and disconnect the spark plug wire.
Thoroughly inspect the mower and grass catcher
for any damage.
Repair any damage before restarting and continuing
to operate the mower.
Allow engine to cool before storing in any enclosure.
To reduce the risk of fire, keep the engine, silencer, and
petrol storage area free of grass, leaves, and excessive
grease.
If the fuel tank has to be drained, this should be done
outdoors.
Disconnect the spark plug before making any
adjustment, transporting, or storing the lawn mower.
Such preventive safety measures reduce the risk of
starting the product accidentally.
This machine is extremely noisy and permanent hearing
loss or damage may result if precautions to limit your
exposure, reduce noise and wear hearing protection
are not strictly adhered to.
SERVICE
Service on the product must be performed by qualified
repair personnel only.
performed by unqualified personnel could result in a
risk of injury to the user, or damage to the machine.
When servicing, use only original manufacturer's
replacement parts. Use of unauthorised parts may
create a risk of serious injury to the user, or damage
to the product.
NOTE: Only perform the tasks listed in this manual. For
person.
Save this manual for future reference. Refer to them
frequently and use them to instruct others who may use
this product. If you lend someone this unit, lend them these
instructions also.
SYMBOL
Some of the following symbols may be used on this
product. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to
operate the product better and safer.
Precautions that involve your safety.
English
Service or maintenance