Polk Omni P1 Handbuch Seite 3

Wi-Fi Setup
1. Download the free Polk Omni App.
2. Plug in your Omni product.
• The Wi-Fi LED on the back
of the product will blink, then
pulse slowly. (Figure 1).
3. Launch the Polk Omni App.
• Follow the instructions in the app
to connect to your network.
• A solid Wi-Fi LED means your
product has successfully
connected. Enjoy.
Note: If you have trouble connecting to
your network, move the adapter near
your router, then relocate it when setup
is complete. Also, if the Wi-Fi LED is not
pulsing slowly, press and hold the Wi-Fi
SETUP Button (for eight seconds), until
you hear the second beep. (Figure 2).
The complete owner's manual can be
found online at www.polkaudio.com
for more information visit our website at www.polkaudio.com
Wi-Fi LED
OPTICAL
OUT
SETUP
Figure 1
Press Wi-Fi
SETUP Button
on back panel
for 8 seconds
Figure 2
3