13.14 "Microwave and convection" mode
The device offers four pre-programmed settings, which facilitate combination cooking
using hot air (convection) and microwaves.
Setting the temperature
Select the temperature you require by pressing the Micro + Convection
button until you reach the level you require (see following table).
Setting the cooking time
Set the cooking time by turning the Time/Menu control dial.
Starting the cooking programme
After selecting the program, press the button Start/Quick Start, to start the
preset cooking programme.
End of the cooking programme
Once the end of the cooking time is reached, four signal tones will be emitted
and END will appear in the display.
Please note
► You can check the hot air temperature during cooking by pressing the button Micro +
Convection.
Button presses
Display
1
200
2
170
3
140
4
110
13.15 "Cooking Program" Mode
In this operating mode, the cooking programme can be selected from 9 different menus. A
list of possible programme is engraved on the operating panel. Please refer to the table on
the next page for more detailed information.
Selecting the Program
First turn the Time/Menu knob briefly anticlockwise and then clockwise to
select the desired program.
Setting the quantity / weight
Select the quantity/weight you require by pressing the Time/Weight button
until you reach the level you require (see following table).
Starting the cooking programme
After selecting the program, press the button Start/Quick Start, to start the
preset cooking programme.
caso MCDG 25 Master (black)
Temperature
200°C
170°C
140°C
110°C
61