Topcom WBR 7011b Schnelle Installationsanleitung Seite 12

Topcom Wireless Broadband Router WBR 7011b
- Username: Enter your PPPoE username.
- Password: Enter your password.
- Service Name: Enter the servive name ( for example the name of
your Internet provider)
- MTU: Enter the MTU size (If the size is not specified by your Internet
Provider, please leave the default value at 1392)
- Connection Type:
* Continuous: The PPP-connection will always be active
* Connect on Demand: The PPP-connection will establish when a
computer is accessing the Internet. The PPP connection will
disconnect when there is no more Internet traffic during the Idle
Time (minutes), entered in the field below
* Manual: The PPP connection is established / disconnected
manually by clicking Connect / Disconnect.
--> Click OK to proceed.
- PPTP xDSL: used for cable modem or DSL bridge with PPTP
connection. PPTP can also be used when the router is connected to
another LAN network.
12 Topcom Wireless Broadband Router WBR 7011b