Items Supplied; Before Using For The First Time; How To Use; Operation - Silvercrest SBLS 20 A1 Bedienungsanleitung

BB58B%ERRN 6HLWH  0LWWZRFK  0lU]   

4. Items supplied

1 Bluetooth speaker
1 Power unit|6
1 Operating instructions
Please observe the illustrations on the fold-
out page.
5. Before using for the
first time
• Remove all packing material.
• Check that the device is undamaged.

6. How to use

NOTE: the device remains in standby mode
after being switched off. As the device still
uses some electricity in this mode, unplug
the power unit|6 from the wall socket after
each use, to disconnect the device from the
mains.
1. Place the device on a level surface.
2. Connect the power unit|6 to the device.
3. Connect the power unit|6 with an easily
accessible wall socket. The blue LED|5
on the power unit|6 lights up. The de-
vice is now in standby mode.

7. Operation

7.1 Establish a Bluetooth
connection
NOTES:
• The identification of the device is
"SBLS|20|A1".
• After turning it on from standby mode,
the device automatically tries to recon-
nect to the last paired device or to estab-
lish a new connection.
• Please observe that the establishment
process of the connection may vary
slightly depending on the device and
the software used.
• The device switches to standby mode...
... if no Bluetooth connection is estab-
lished within 20 minutes or
... if it does not receive a signal for
20 minutes.
1. Remove a plug from the AUX IN|4
socket if applicable.
2. Press the On/Off button
on the device from standby mode. The
On/Off button |1 flashes. An acoustic
signal sounds.
3. Switch on the audio device (e.g. smart-
phone) and start the Bluetooth connec-
tion. The audio device will now receive
the device identification "SBLS|20|A1".
4. Establish a connection to the Bluetooth
speaker on the audio device. Both de-
vices are now interconnected. The On/
Off button |1 lights up and an acous-
tic signal sounds.
NOTE: it is possible that audio devices re-
member the identification of the device. Thus
it is possible that a new manual connection
establishment is not required while the Blue-
tooth function is active.
5. Now play a song on the audio device.
The sound is reproduced via the loud-
speakers|2.
6. Use the audio device to select and con-
trol the songs and to set the desired vol-
ume.
|1 to switch
29
GB