Menu Function - gopart CR210GP Bedienungsanleitung

mENU FUNCTION

Press VOL knob for more than 2 seconds to enter menu mode, then each press changes the mode
as follows: TA mode -> MASK mode -> TA VOL mode ->RETUNE mode -> DSP mode -> ESP mode
->MULT mode -> LOUD ON/OFF mode
-> BEEP ON/OFF -> SEEK1/2 mode(only in tuner mode) -> ST/MO mode(only in tuner mode) -> LOCAL/
DX mode(only in tuner mode) -> VOL mode -> 12/ 24 HOUR mode
TA mode
Rotate the knob to choose TA ALARM or TA SEEK mode. If the TA (traffic announcements) is turned on
and there is no traffic program identification code received in the specified time, no TA/TP will display
and either TA ALARM or TA SEEK will be activated.
TA ALARM mode : Alarm is turned on.
TA SEEK mode: TA SEEK is automatically activated.
mASK mode
Rotate the knob to choose MASK DPI or MASK ALL mode.
In some cases, the AF function may be influenced by some interference, examples are signals with
strong field but without the RDS data. For this reason, the unit has two options to avoid the above
interference.
MASK DPI mode :
Only AF which has different program identification is masked.
MASK ALL mode :
The AF which has different program identification and NO RDS signal with high field strength is masked.
TA VOL mode
Rotate the knob to adjust TA volume level.
RETUNE mode
Rotate the knob to choose RETUNE-S or RETUNE-L.
RETUNE-S or RETUNE-L is time length selection of TA SEEK retune interval.
RETUNE-S: Short, TA SEEK retune interval is 45 seconds.
RETUNE-L: Long, TA SEEK retune interval is 180 seconds.
Remark: RETUNE mode functions for TA during TA SEEK mode only.
DSP mode
Rotate the knob to choose DSP sound effect: POP -> FLAT -> CLASSIC -> ROCK -> OFF
EPS mode
ESP 12s: Selected as CD-ESP time 12 seconds, MP3-ESP time >100 seconds.
ESP 45s: Selected as CD-ESP time 45 seconds, MP3-ESP time >100 seconds.
CR210GP
270114_CR210GP_manual 01 UK_DE_FR.indd 15
UK
15
1/27/14 11:38 AM