Philips HQ8174CC Bedienungsanleitung Seite 9

2 Press the start button to start the cleaning
program.
The cleaning light starts to flash and the shaver is
automatically lowered into the cleaning fluid.
During the cleaning program, which takes
,
approx. 1 hour, the cleaning light flashes
continuously.
During the first phase of the cleaning program,
,
the shaver automatically switches on and off
several times and is put in different positions.
During the second phase of the cleaning
,
program, the shaver is placed in the drying
position. It stays in this position until the end
of the program. The cleaning light lights up
continuously.
After the cleaning program, the shaver
,
automatically returns to its starting position and
the charging program is started. The charging
light flashes.
Note: If you press the start button or open the lever
during cleaning, the cleaning program is aborted and
reset. In this case, the cleaning light stops flashing and
the holder returns to its starting position.
Note: If the powerplug is removed from the wall socket
during cleaning, the cleaning program is aborted.
The holder remains in its current position. When
the powerplug is put back into the wall socket, the
holder moves to the highest position.
Note: If the fluid volume in the cleaning chamber drops
below the minimum level during the cleaning program,
the program is aborted. The cleaning light flashes with
intervals and the holder returns to its starting position.
EnglisH
11