Printing; Printing A Page; Executing Printing - Olivetti Copia 9915F Druckerbedienungsanleitung

2

PRINTING

PRINTING A PAGE

The printing method is described below. Read the description in the operation manual for the
application to be used.
G
Before you can use your printer, you must install the supplied Olivetti GDI
printer driver. Once this software has been installed, you can control the
printing of your documents from the printer driver which appears on your
computer screen. See INSTALLING THE PRINTER DRIVER SOFTWARE
on page 1-6.
G
When using multiple printers, you must change the printer selection from the
control panel to change the printer to be used. This printer cannot be used
with other GDI printers or printers that use the Windows Printing System. For
details, see USING OTHER INSTALLED DRIVERS on page 1-24.

Executing printing

Ensure that paper of the desired size is loaded in the paper tray. (See the section on
1
LOADING COPY PAPER in the copier operation manual.)
To print on special paper, the bypass tray can be used. Select the bypass from
the printer driver. See SETTING PRINT CONDITIONS FROM PRINTER
DRIVER on page 1-14. Also see the description of bypass feed operation in the
copier operation manual. Always feed special paper one sheet at a time.
Turn on the printer. The ready (
2
Select the settings for printing such as the number of copies and paper type from the
3
application. See SETTING PRINT CONDITIONS FROM PRINTER DRIVER on page
1-14.
Before printing from your application, ensure that the Olivetti Copia 9915F
has been selected as the printer.
Print the file from your software application.
4
) indicator will light up.
1-13