•
Line the fasteners of the Prima Easy, Prima Fix, Baby Zero Plus, Playmoon, Mako,
Metropol, Sono o Newmoon up with the slots.
•
Press downwards until it clicks into place (fig. 26).
•
To remove it, press and then release the red button on both fasteners and pull upwards
to release it from the chassis of the pushchair (fig. 27).
NOTE: THE AVANT CAN BE FOLDED WITHOUT THE SEAT OR WITH THE
SEAT FACING FORWARDS OR BACKWARDS. IT CAN NOT BE FOLDED
WITH THE COMPLEMENTS.
Fitting the muff
NOTE: The muff is a complement that is sold separately.
•
Remove the chest pads.
•
Pass the buckles of the harness through the vents in the seat and the mattress pad.
NOTE: take care when fitting the harness to make sure that the straps are not twisted.
•
Unfasten the safety harness. Place the muff on the seat and insert all the parts of the
harness through the corresponding vents.
•
Fasten all the parts of the buckle, and fit the chest pads.
Basket
•
The basket is clipped onto the bottom part of the chassis, to take it off simply unfasten
the clips and remove it.
•
The maximum weight that can be carried in the basket is 2.5 kg.
•
It is advisable to empty the basket before folding the pushchair.
Maintenance
•
Periodically grease the mobile parts with a lubricating product (not grease or oil).
•
Check the brakes, harness, clips and mechanisms that can become loose or worn out
through use.
•
Clean the chassis with a damp cloth (never use abrasive products or solvents). Use a
sponge with warm water and mild detergent on the plastic parts.
•
Follow the washing instructions for the fabric parts of the pushchair, let them dry fully
before folding. Do the same if the pushchair has been exposed to damp conditions to
prevent mould from forming.
•
Do not use accessories that have not been approved by the manufacturer.
(illustration 28)
21