EuroLite TMH XB-280 Bedienungsanleitung Seite 32

The functions provided are described in the following sections.
Default settings shaded.
Main menu
Run mode
DMX address
Channel mode
Invert PAN
Invert TILT
Set
PAN-TILT Swap
PAN-TILT Encoder
DMX signal
Lamp on
Linear color
Load default
Manu PAN ...
DIS
MT
Reset Cal
Sensor Monitor
Sys
System errors
DMX monitor
Lamp Hours *
Total lamp Hours
* = To reset the operating hours of the illuminant to 0, set the DMX address to 256 and press the Enter
button for 5 seconds.
Set
Run Mode
DMX mode
This mode allows the unit to be controlled via any standard DMX controller.
Sound
With this function, you can run the internal program sound-controlled.
Random auto mode
With this function, you can run the random internal program.
Auto mode (Auto 1+2)
With this function, you can run 2 different internal programs.
DMX address setting
With this function, you can adjust the desired DMX address via the Control Board.
Number of DMX channels
With this function, you can display the desired DMX channel mode.
Invert PAN
With this function, you can reverse the PAN-movement.
Invert TILT
With this function, you can reverse the TILT-movement.
PAN-TILT Swap
With this function, you can swap PAN and TILT.
Sub menu
DMX/Sound/Random/
Auto 1, Auto 2
001~ 512
16 CH / 19 CH
ON/OFF
ON/OFF
ON/OFF
ON/OFF
Keep/clear
ON/OFF
ON/OFF
OK/Cancel
PAN = XXX ...
T105B-L.191119
L.191119
32/40
Function
DMX mode / music control / random auto
program / auto program 1 and 2
DMX address setting
Number of DMX channels
Reverse movement
PAN-TILT swap
Automatic PAN/TILT adjustment
Action if no DMX
Lamp on by power on
Switch color change from step to linear color
Restore factory settings
Test function
Software Version: Display
Software Version: PCB
Calibration to standard position
Only service function for producer
Error message
Current DMX address of the channels
Operating hours of the illuminant
Total operating hours of the device
00127924, Version 1.0