4000Toce Sensor; Menu Structure - Mettler Toledo 4000TOCe Kurzanleitung

8 4000TOCe Sensor

The 4000TOCe Sensor housing provides four LED status lights and a single push button
key for local UV lamp control. See Figure 4.
Figure 4
Sensor status LED: Illuminates whenever AC power is on and the M300TOC and 4000TOCe
are connected.
UV Lamp ON LED: When illuminated continuously, UV Lamp is on. When flashing, indi-
cates sensor is in rinse and auto-balance mode.
UV Lamp ON key: Allows the user to turn UV lamp on or off at the sensor. Sensor Status
LED: Illuminates continuously when sensor is powered and the patch cable is plugged in.
Not lit if patch cable or power is disconnected.
Error LED: Illuminates continuously when an Error condition exists.
Fault LED: Flashing when a Fault condition exists.

9 Menu Structure

Menu
Quick Setup
Analog Outputs
Set Points
Measurement
Mode M300
Cal
Messages Calibration Data
Configure
Measurement Set Language
Analog Outputs
Set Points
Alarm Set/Clear Lockout
TOC Setup
Display
Flow Control
Hold outputs
Model/Software
Revision
System Service
Diagnostic
USB Calibrate
Passwords Tech Service
Reset
Info
TOC Sensor Info
9