Guarantee; Cleaning And Maintenance - AEG SRR 4301 CD/MP3 Bedienungsanleitung, Garantie

STOP (2): The CD is stopped.
REPEAT (4):
Press once:
The current song is repeated
continually. (The dot in the display
fl ashes.)
Press twice:
The entire CD is repeated continu-
ally. (The dot in the display lights
up.)
Press three times:
The function is deactivated and the
CD is played in the normal mode.
Programmed Play
This can be used to program any desired sequence of
tracks.
1. Press the STOP key (2).
2. Press the PROGRAM key (5). „P.01" (storage loca-
tion) appears in the display (6) together with a dot
on the left. Use the SKIP buttons (9) to select the
desired track and then press the PROGRAM button
(5) again. The display changes to memory slot 02.
3. Select the next track with the SKIP key (9) and press
the PROGRAM key (5) again. Repeat the procedure
until all the desired tracks are selected.
4. Press the /II play/pause button (10). ,The playback
starts. The selected track numbers are shown in
the display in the correct order. Press this button to
pause briefl y the playback.
5. To play the programme again, press the /II play/
pause button.
6. The device stops automatically once the entire se-
quence of programmed tracks is completed. In order
to stop playback or delete the programme, press the
Stop button (2). The programme is also deleted if
you change to another mode, e.g. TAPE, remove the
CD from the CD compartment or switch the machine
off.
It is also possible to combine the programmed tracks
with the REPEAT function. After you have programmed
and started the device, please press the REPEAT button
(4) up to three times and then you can use the functions
as described under „REPEAT".
MP3 CDs
This machine of is able to play MP3 CDs. Up to 200
tracks can be compressed and stored on these CDs.
Your machine detects an MP3 CD automatically (a dot
lights up in the display on the right (6)). If you would like
to play one of these CDs, proceed as described under
„Playing CDs". Tracks can be programmed as described
under „Playing Back Programmed Tracks".

Cleaning and Maintenance

• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a
slightly damp cloth without any additives.
5....-05-SRR 4301 AEG 27
This device has been tested according to all relevant cur-
rent CE guidelines, such as electromagnetic compatibili-
ty and low voltage directives, and has been constructed
in accordance with the latest safety regulations.
Subject to technical changes without prior notice!

Guarantee

The device supplied by our Company is covered by a
24 month guarantee starting on the date of purchase
(receipt).
During the life of the guarantee any fault of the device or
its accessories *) ascribable to material or manufacturing
defects will be eliminated free of charge by repairing or,
at our discretion, by replacing it. The guarantee services
do not entail an extension of the life of the guarantee nor
do they give rise to any right to a new guarantee!
Proof of the guarantee is provided by the proof of
purchase. Without proof of purchase no free replacement
or repair will be carried out.
For repairs or replacement during the life of the guaran-
tee return the device in its original packing together with
the proof of purchase to your dealer.
*) Damage to accessories does not mean automatic free
replacement of the whole machine. In such cases please
contact our hotline. Broken glass or breakage of plastic
parts are always subject to a charge.
Defects to consumables or parts subject to wearing
(e.g. motor pistons, kneading blades, drive shafts, spare
remote control, spare toothbrushes, saw blades, etc.) as
well as cleaning, maintenance or the replacement of said
parts are not covered by the guarantee and hence are
to be paid!
The guarantee lapses in case of unauthorized tampering.
After the expiry of the guarantee
After the expiry of the guarantee repairs can be carried
by the competent dealer or repair service against the
payment of the ensuing costs.
27
30.01.2004, 9:04:39 Uhr