Diesel FL137AX Bedienungsanleitung Seite 6

Chronograph Stopwatch
MINUTE HAND
SECOND HAND
time anD Date Setting
1 . Before setting the time, make sure the chronograph is stopped and set to zero (12:00) position .
2 . Pull crown out to position 2 .
3 . Turn crown clockwise until the previous day's date is displayed .
4 . Pull crown out to position 3 when the second hand is at the 12:00 position .
5 . Turn crown to set time .
NOTE: The movement of the 24-hour hand corresponds to the hour and minute hands. When setting
the time be sure to check that the 24-hour hand is set properly.
6 . Return crown to position 1 .
NOTE: When the crown is in position 2, do not press the pushers. Otherwise the chronograph hands
will move.
CHROnOgRaPH
1 . Press A to start/stop the chronograph .
2 . Press B to reset to zero .
SPlit time
1 . Press B while the chronograph is running .
2 . Press B again to return to the chronograph .
3 . Press A to finalize timing .
4 . Press B to reset .
CHROnOgRaPH ZeRO ReSet
1 . If either of the chronograph hands is not at the zero (12:00) position, pull crown out to position 3 .
2 . Press A to move hands clockwise; press B to move hands counter-clockwise .
3 . Return crown to position 1 .
10
VD53, VD53B
A
24-HOUR HAND
B
Digital
FL137AX, FL137AB, QFOX21CA, QFOX21CB
A
Digital FL137AX / QFOX21CA / QFOX21CB
nORmal time DiSPlay
1 . Press A to change display . Display sequence is time, calendar, seconds .
2 . Press B to toggle 12/24-hour format .
time anD Date Setting
1 . Press and hold B for 2 seconds to enter setting mode; year will begin flashing .
2 . Press A to advance digit; press and hold A for fast advance .
3 . Press B to set and advance to next setting value .
4 . Setting sequence is year, month, date, hour, minute .
5 . Press B to exit setting mode .
NOTE: Hour will be displayed in 24-hour format in time setting mode.
NOTE: If no pusher/button is operated for 30 seconds, all changes will be saved and the setting
will automatically return to display mode.
B
Digital FL137AB
B
A
11