(C) Automatic Zone Registration Using The On-Off Controller (Tcb- Sc642Tle) - Toshiba TCB-CC163TLE Installations-Handbuch

(c) Automatic zone registration using the ON-OFF controller (TCB-
SC642TLE)
(1) Press the and
seconds.
and CODE No. C1 will flash.
(2) Select CODE. No. C2 by pressing
and press the button.
C2 changes from flashing to ON state and automatic zone
registration will start.
(3) Registered GROUP No. will be disappeared all.
(4) Central address will be assigned from small indoor unit address to
large one in numerical order automatically.
Finishing automatic zone registration,
to OFF.
(5) If the error is happened, the "CHECK" starts flashing and zone
registration finishes at this time. Press the
(6) Finally, complete automatic zone registration mode by pressing the
button.
flashes for a few minutes, then OFF.
18
buttons at the same time for more than 4
and
changes from flashing
button.
( ) button
Fig. 13
OI-744-18EG