Safety Notes; System Requirements; Installation - PCE Instruments PCE-GM 75 Bedienungsanleitung

1

Safety notes

Acquaint yourself with the operation of the measuring device before using it in combination with
the PC software. For this purpose, use the instruction manual which comes with your PCE
product. All safety notes from the device's manual have to be observed as well when the device
is used with this software.
The device and the software may only be used by qualified personnel. Damage or injuries caused
by non-observance of the manuals are excluded from our liability and not covered by our warranty.
We do not assume liability for printing errors or any other mistakes in this manual.
We expressly point to our general warranty terms which can be found in our general terms of
business.
If you have any questions please contact PCE Instruments. The contact details can be found at
the end of this manual.
2

System requirements

Operating system Windows 7 or higher
•
USB port (2.0 or higher)
•
Installed .NET framework 4.0
•
Minimum resolution of 800x600 pixels
•
Optional: printer
•
• Processor with 1 GHz
• 4 GB RAM recommended
3

Installation

Please run the "Setup PCE-GM 75.exe" and follow the instructions of the setup.
© PCE Instruments
11