EN
4. Getting Started
4.1. Installation
1. Open and remove the phone back protection cover
2. Insert the SIM into the device. The golden contacts on the SIM card
face down and the edges align with the corresponding edges of the SIM
card.
3. Insert the battery chip into the protruding metal point in the battery
slot, insert the battery, and push the top down until the battery engages
in the recess.
4. Put back the back cover.
4.2. Charging the battery
Connect the charger to the appliance and plug the other end into the
socket. If the device is turned on while charging, the battery icon will
move in the right corner of the display. Charging is completed when the
charging indicator on the top right is lit. If charging is switched off, a
charging indicator appears on the display. When charging is complete,
unplug the charger from the unit.
Note: When the battery voltage is low, a warning message is displayed
4