Klarstein Luna Bedienungsanleitung Seite 32

EN
32
Activated Carbon Filter (Circulating Air Version)
• These filters are not washable and cannot be regenerated, and must be replaced
approximately every 4 months of operation, or more frequently with heavy usage.
FIX:
1. Put in
2. Push forward
REMOVE:
1. Pull forward
2. Remove
Replacing the Activated Charcoal Filter
1. Remove the metal grease filters.
2. Remove the saturated activated charcoal filter.
3. Insert the new activated charcoal filters.
4. Replace the metal grease filters.
Replacing the Lamp
• You cannot replaced the light bulbs, the entire light module has to be replaced.
• When changing the light modules, the contacts are live.
• Before changing the light module(s), unplug the appliance from the mains or switch
off the circuit breaker in the fuse box.
1. Remove the grease filter and carefully remove the 4 screws from each side on the
opening (a cross headed screwdriver will be needed to remove the screws).
REMOVE:
1. Pull forward
2. Remove
FIX:
1. Put in
2. Push forward