Connect Data Storage (Optional); Connect Power Supply - Avanit SHD5 Bedienungsanleitung

Installation of AVANIT SHD5
b.
Your home cinema system can process digital
audio data – connection for digital data is pre-
sent.
¾ Verbinden Sie die Heimkinoanlage und den Recei-
ver mit einem Cinch-Kabel.
c.
Your home cinema system can not process digi-
tal audio data – no connections for digital data
present
¾ Connect the home cinema system and the re-ceiver by
using a 2-pole RCA cable (stereo).
¾ If your home cinema system (hi-fi system) supports HDMI
)

4.5 Connect Data Storage (Optional)

¾ Connect a data storage (USB stick or hard drive with USB connection) at the USB
connector to be able to save video and timeshift recordings (see chapter 5.8.8,
page 116)
or
to be able to access MPEG, MP3, JPG or other media data files.

4.6 Connect Power Supply

¾ When all devices are properly connected to the receiver you can connect the
mains plug to the power outlet.
98
connection, then use such connection.
This ensures best possible audio and video quality with digi-
tal signals.
AVANIT SHD5