Safety Instructions; Maintenance And Care; Technical Data - EINHELL APM 242 Bedienungsanleitung

Anleitung APM 242 SPK 1
GB
Important! To prevent damage and the risk of
fire, electrocution or injury, please read and
observe the following safety instructions before
using the polishing machine.

1. Safety instructions

The corresponding safety information can be
found in the enclosed booklet.

2. Maintenance and care

Wash the polishing cap only by hand and hang up
to dry.
When not in use, remove the polishing cap and
store the polishing machine upside down so that
the polishing pad can dry and retains its original
shape.
The excessive use of wax and paste can cause
the polishing cap to jump off the polishing pad
while polishing.
Use only a mild soap and damp cloth to clean the
polishing cap.
Important! Do not use any abrasive polishing
agents!
3. Care tips
For optimum paintwork protection, you should
polish your car 2 to 3 times a year.
Wash your car at least every 2 weeks. Avoid using
household detergents as these can damage the
paintwork and remove the layer of wax.
Wash your car with a clean sponge, working from
top to bottom.
Remove all insects, bird droppings and tar stains
from the paintwork daily.
If you use any window-cleaning agents, spray
them onto a cloth and not directly onto the
windows in order to prevent them wetting the
paintwork.
4
11.04.2005 9:45 Uhr Seite 4

4. Technical data

Voltage:
Power rating:
Speed:
Polishing pad:
Weight:
Sound pressure level at the
workplace LPA:
Weighted harmonic value a :
w
Totally insulated
5. Instructions for use
When using wax and polishes, please observe
the manufacturers' instructions.
Pull the textile polis-
hing cap over the
polishing pad. Make
sure the polishing
cap is completely
clean.
Spread the polishing
paste evenly over
the polishing pad.
Do not apply the
polish directly to the
polishing surface.
230V ~ 50 Hz
100 W
3400 rpm
240 mm dia.
2.3 kg
67 dB(A)
11,1 m/s 2
II / ®