2. If you wish to continue scanning, press the seek button (5) again.
Station scan will cover the entire frequency range up to 108 MHz.
3. Press the reset key (4) followed by the seek key (5) to start
scanning again starting at 87.5 MHz.
Using Headphones
A 3.5 mm TRS jack (2) for headphones is located at the right side of
the unit.
Insert the plug of the headphones until it audibly snaps in.
Using headphones will disable the internal speaker of the radio.
Cleaning and Care
Clean the unit only with a dry or lightly moistened cloth. Do not
use aggressive chemicals or abrasives for cleaning.
Do not immerse the unit in liquids of any kind.
Store the unit indoors in a dry place that is protected from dust,
dirt and extreme temperatures.
Operation
19