Using - Westfalia Q1P-JR01-400 Bedienungsanleitung

Oil based Paint: 18 – 22 seconds
Enamel Paint: 18 – 22 seconds
Aluminium Paint: 22 – 25 seconds
Car Underbody
Sealants: 25 – 35 seconds
Wood Sealers: 28 – 35 seconds
Wood Preservatives: No thinning required
Wood Stains: No thinning required
2. If the paint takes longer than the recommended time to empty, then further
thinning is required.
3. Mix in a small quantity of the appropriate thinner and use the viscosity test
until the correct thickness is achieved.
4. Some sprayable materials contain particles or lumps. Strain those materials
before filling into the paint container.

Using

1. Hold the motor housing (1) firmly with one hand and turn the paint container
(9) counter clockwise from the paint container screw cap (8).
2. Fill the paint container with the thinned paint as described above.
3. Carefully turn the paint container clockwise on the paint container screw cap.
4. Connect the spray gun to power mains.
5. Aim the spray gun at a piece of paper or scrap and press the ON/OFF switch
in direction I. Now operate the trigger (3) until paint is sprayed.
6. Adjust the spray pattern
with the spray stream
adjuster (7).
stream adjuster you can
realize vertical, horizontal
and round spraying effect.
Operation
With the
12
7