Maintenance And Cleaning - WIKA TF35 Betriebsanleitung

5. Commissioning, operation / 6. Maintenance and cleaning
Circular connector M12 x 1
Rectangular connector per DIN EN 175301-803

6. Maintenance and cleaning

For contact details see chapter 1 "General information" or the back page
of the operating instructions.
6.1 Maintenance
The threaded thermometer is maintenance-free.
Repairs should only be carried out by the manufacturer or, following prior consultation,
by correspondingly qualified skilled personnel.
6.2 Cleaning
CAUTION!
Physical injuries and damage to property and the environment
Improper cleaning may lead to physical injuries and damage to property
and the environment. Residual media in the dismounted instrument can
result in a risk to persons, the environment and equipment.
▶
Carry out the cleaning process as described below.
1. Prior to cleaning, switch off and disconnect the instrument from the voltage supply.
2. Clean the instrument with a moist cloth.
Electrical connections must not come into contact with moisture!
WIKA operating instructions model TF35
2-wire 3-wire
2-wire 3-wire
4-wire
4-wire
13
EN