Additional Safety Warnings - Ryobi RPW110B Übersetzung Der Originalanleitung

switch turns off the pump and the
high-pressure jet stops. If the lever is
pulled, the pump turns on again.
●
Overload protection
– A thermal sensor protects the product
from overloading. The product will
automatically shut the power down
while overheating.
■
Do not use the product if the important
parts are damaged, such as safety devices,
high-pressure hoses, or trigger gun.
■
Exercise caution when opening the trigger.
Hold the handle firmly with two hands to
avoid injury when the handle kicks back.
WARNING
During use of high pressure cleaners,
aerosols may be formed. Inhalation of
aerosols can be hazardous to health.
WARNING
Depending on the application, shielded
nozzles can be used for high-pressure
cleaning, which will reduce the emission
of hydrous aerosols. However, not all
applications allow the use of such a device.
If shielded nozzles are not applicable for the
protection against aerosols, a respiratory
mask of class FFP 2 or equivalent may
be needed, depending on the cleaning
environment.
■
Always stop the product when you leave it
unattended.
■
High-pressure jet is dangerous if misused.
Do not direct the jet to people, live electrical
equipment, or the product itself.
■
To avoid a risk of explosion, do not spray
flammable liquids.
■
Do not direct the jet against yourself or
others in order to clean clothes or footwear.
■
Do not use the product to clean electronic
devices, clothes, or footwear.
■
High-pressure hoses, fittings, and couplings
are important for the safety of the product.
Use only hoses, fittings, and couplings
recommended by the manufacturer.
ELECTRICAL SAFETY WARNINGS
■
The plug must match the outlet. Never
modify the plug in any way. Unmodified
2 | English
plugs and matching outlets reduces the
risk of electric shock.
■
Do not use the product if the power cord
or other important parts, such as safety
devices, are damaged.
■
Check the power cord and the extension
cord for damage before each use. If
the power cord or the extension cord
is damaged, it must be replaced by the
manufacturer, its service agent, or similarly
qualified persons in order to avoid a hazard.
■
Keep the power cord away from heat, oil,
and sharp edges.
■
Never touch the mains plug and the socket
with wet hands.
■
Inadequate extension
dangerous. If an extension cord is used,
it shall be suitable for outdoor use, and
the connection has to be kept dry and off
the ground. Use a cord wheel to keep the
socket at least 60 mm above the ground.
■
The electric supply connection must
be made by a qualified electrician and
must comply with IEC 60364-1. It is
recommended that the electric supply to
the product should include either a residual
current device that interrupts the supply if
the leakage current to earth exceeds 30
mA for 30 ms or a device that proves the
earth circuit.

ADDITIONAL SAFETY WARNINGS

■
Some regions have regulations that restrict
the use of the product in some operations.
Check with your local authority for advice.
■
Before each use, check for damage.
A damaged high-pressure hose must
be replaced immediately. Ensure all
connections, such as high-pressure hose
and nozzle, are secure. Unwind the hose
properly so they may not get twisted or
kinked.
■
Do not allow children
individuals to use the product.
■
Before starting any cleaning operation,
close doors and windows. Clear the area
to be cleaned of debris, toys, outdoor
furniture, or other objects that could create
a hazard.
■
Never pick up or carry the product while the
motor is running.
cords can be
or untrained