Introduction; Intended Use; Features - Parkside PFBS 160 B2 Originalbetriebsanleitung

ROTARY TOOL PFBS 160 B2

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

This precision drill grinder (hereafter also referred
to as the "appliance") is intended for drilling,
milling, engraving, polishing, cleaning, grinding,
cutting of wood, metal, plastics, ceramics and stone
in dry rooms. Any other uses of or modifications
to the machine are deemed to be improper usage
and may result in serious physical injury. Not for
commercial use.

Features

Rotary tool:
ON/OFF switch
Power cable
Bracket
Ventilation slits
Union nut
Tensioning nut
Collet chuck 3.2 mm (pre-assembled)
Grip ring with LED light
Spindle lock button
Carbon brushes
Infinitely variable speed control
│ GB │ IE
■ 20
Accessories (see fig. A):
Locking screw
Router cage
Flexible shaft
Union nut (flexible shaft)
14b
Spindle lock (flexible shaft)
Stand mount
Stand
Clamping assembly
Accessories set (42 pieces) (see fig. B):
6 cutting discs (max. 40000 rpm)
2 grinding discs, abrasive (max. 40000 rpm)
1 whet stone
3 polishing attachments (max. 20000 rpm)
5 abrasive belts (max. 40000 rpm)
1 abrasive belt mandrel
1 combination spanner
1 collet chuck 2.4 mm
1 metal brush (max. 15000 rpm)
2 plastic brushes (max. 15000 rpm)
1 mandrel for cutting/grinding discs
1 drill bit (max. 20000 rpm)
1 milling bit (max. 40000 rpm)
1 mandrel for polishing attachments
2 engraving bits (max. 40000 rpm)
5 grinding bits, abrasive (max. 40000 rpm)
8 cutting discs (max. 40000 rpm)
ON/OFF switch LED light
WARNING!
■ Never exceed the specified maximum rota-
tional speed (see section: "Notes on working
with materials/tools/speed range").
PFBS 160 B2