ASROCK FM2A88X-ITX+ Bedienungsanleitung Seite 26

2.6 Onboard Headers and Connectors
Serial ATA3 Connectors
(SATA3_1: see p.3, No. 16)
(SATA3_2: see p.3, No. 15)
(SATA3_3: see p.3, No. 14)
(SATA3_4: see p.3, No. 13)
(SATA3_5: see p.3, No. 12)
(SATA3_6: see p.3, No. 11)
USB 2.0 Headers
(9-pin USB_45)
(see p.3 No. 19)
(9-pin USB_67)
(see p.3 No. 20)
USB 3.0 Header
(19-pin USB3_0_1)
(see p.3, No. 10)
26
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
DUMMY
GND
P+5
P-5
USB_PWR
1
DUMMY
GND
P+7
P-7
USB_PWR
1
Vbus
IntA_P0_SSRX-
IntA_P0_SSRX+
GND
IntA_P0_SSTX-
IntA_P0_SSTX+
GND
IntA_P0_D-
IntA_P0_D+
1
These six Serial ATA3
(SATA3) connectors support
SATA data cables for internal
storage devices. The current
SATA3 interface allows up to
6.0 Gb/s data transfer rate.
Besides four default USB 2.0
ports on the I/O panel, there
GND
P+4
are two USB 2.0 headers on
P-4
this motherboard. Each USB 2.0
USB_PWR
header can support two USB
2.0 ports.
GND
P+6
P-6
USB_PWR
Besides two default USB 3.0
Vbus Vbus
ports on the I/O panel, there is
IntA_P1_SSRX-
IntA_P1_SSRX+
one USB 3.0 header on this
GND
motherboard. This USB 3.0
IntA_P1_SSTX-
IntA_P1_SSTX+
header can support two USB 3.0
GND
IntA_P1_D-
ports.
IntA_P1_D+
ID