Placing A Call With The Car Kit - Motorola IHF1000 Hier Beginnen

Placing a Call with the Car Kit

To place a call, you must first establish a Bluetooth
between the car kit and your phone (see page 22).
You can place a call with the car kit in these ways:
• Dial a number from the phone.
• Digit dial with Speech recognition.
• Use the system's Contact List.
• Speak a phone voice tag [phone voice name].
• Use the Speed Dial command.
• Use the Redial command.
• Use last number redial from the User Interface
Module.
When connected, all of these calls are handsfree. You can
terminate a SR session at any time by pressing the END
button.
Placing a Call with Speech recognition
You can enter a phone number as 1 or more segments of
digits. A segment can include up to 15 digits. An entire
number can include no more than 32 digits. You can begin
the number set with the * or # character.
Note: Speak numbers as continuous digits. For example,
dictate 555-2211 as "5-5-5-2-2-1-1", not
"5-5-5-twenty-two-eleven."
®
link
27 28
Calling with a Whole Number
Action
1 Press the TALK button.
2 When prompted, say "Dial Number."
The system responds: Number please?.
3 Dictate the phone number as a single set of digits
(without pauses between digits).
The system recites the digits heard.
4 If the number recited by the system is correct, say
"Dial." The system responds: Dialing.
Calling with Digit Segments
Action
1 Press the TALK button.
2 When prompted, say "Dial Number."
The system responds: Number please?.
3 Dictate the first segment of digits. (For example, say
the 1st 3 numbers.)
The system recites the digits heard.
4 Dictate the next segment of digits. The system
recites the digits heard.
Repeat this step until you enter the complete phone
number.
5 When the complete number is recited by the system,
say "Dial." The system responds: Dialing.