tfk mono sport Gebrauchsanleitung Seite 11

OPERATING AND ASSEMBLY INSTRUCTIONS
Fig 1:
To use the tfk mono, fold the pushbar (1) upwards. This will unfold the pram.
Make sure that the pins (2) audibly engage in the lock. To fold together,
pull the two locks (2) upwards, they will remain open automatically. You
can then fold the pushbar (1) forwards. The frame folds in automatically.
To ensure that it remains folded during transport, hook in the transport
lock (3).
Fig 2:
To mount the rear wheels, insert the axle into the frame so that the brake
is also in the holder (4). Attach the brake hook (5) in the M-brake. If you
wish to remove the wheels, detach the brake hooks (5) and press the
kangaroo button (6) in the middle of the wheel. You can now remove the
wheels. You can adjust the braking force by turning the adjusting screw of
the brake hooks (5) in or out and securing them in the chosen position with
the counter screw.
Fig. 3:
Insert the front wheel into the opening (7) provided for it until it audibly
engages. By turning the adjusting knob (8) you can choose whether the
front wheel is locked in straight-running position or can turn freely. If you
press the grey button, you can remove the wheel by pulling downwards.
Fig. 4.:
The front wheel of the tfk sport is fixed in the fork with the quick release
axle. On the air wheel set of the tfk mono and on the front wheel of the
tfk sport you can adjust the straight-line stability if necessary using the two
adjustment wheels (9) located in the wheel mount.
Fig 5.:
The pushbar height can be adjusted by pressing the two adjustment joints
(10). If you are travelling with the tfk mono and the tfk sport, please attach
the supplied safety loop (11) to the rear axle. Then slip the side with the
elastic band over your wrist. TFK recommends that you always use the
safety loop to prevent the stroller from rolling away unintentionally. When
not in use, you can store it in a bag in the basket, ready for use.
Fig 6: