LaserLiner ActiveFinder Pro Bedienungsanleitung Seite 10

Please be aware that even if a visual signal is not displayed,
voltage may still be present. Differences in the design of the
!
connection socket or the nature of the insulation (thickness
and type) can affect functionality. Voltage cannot be detected
behind panels and metal covers.
5
Battery lamp
Press button 5 to switch the flashlight on and off.
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents,
scouring agents and solvents. Remove the battery(ies) before storing for
longer periods. Store the device in a clean and dry place.
Technical data
Indicator
Voltage range
Overvoltage category
Power supply
Operating conditions
Storage conditions
Dimensions (W x H x D)
Weight (incl. batteries)
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be
collected separately for disposal according to
the European Directive on waste electrical and
electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info/?an=AHD
Subject to technical alterations. 18W42
LED (red/green)
100 VAC ~ 1000 VAC
Frequency 50 ... 60Hz
CAT IV - 1000 V
(non-condensing)
Pollution degree 2
2 x 1,5 AAA (NEDA 24A/IEC LR 03)
0°C ... 50°C, Max. humidity
80% rH, no condensation,
max. altitude 2000 m
-10°C ... 60°C, Max. humidity
80% rH
20 x 157 x 26 mm
58 g
ActiveFinder Pro
11
EN