Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTRUCTIONS FOR USE
ISTRUZIONI PER L'USO
EN
I
3
INSTRUCTIONS
1) Mount wheel hub on uprights (8), which are suitable for quick-release threaded hub. (see picture 3)
3) Set up measuring callipers (1) by adjusting measuring calliper knob (short) (2) and measuring calliper arm knob (long) (4).
3.1) Proceed with radial truing of rim by turning measuring calliper knob (short) (2) and make measuring callipers (1) get close
to rim. (See picture 6)
3.2) Proceed with lateral truing of rim by turning measuring calliper arm knob (long) (4) and make measuring calliper (1) get
close to rim. (See picture 7)
4) After setting up proper distance between measuring callipers (1) and rim, true part of rim which is touched by measuring
callipers (1) when turning rim.
5) Repeat steps 3 to 4 until truing of rim is completed.
to ensure the truing accurately
5
Werbung
Inhaltsverzeichnis
