Operating Notes; Connecting The Transmitter To Ac Power; Connecting The Transmitter To Your Audio Source; Charging The Batteries In The Headphones - AKG HEARO 777 Bedienungsanleitung

1.5. IVA STEREO: This green LED lights to indicate the IVA processor is switched in.
16. IVA SURROUND: This green LED lights to indicate thar both the Dolby Surround Pro Logic decoder and the IVA processor are
17. Mode switch: This threeposition slide switch selects stereo, IVA, and Surround + IVA modes.
7. INPUT L/R: Left and right RCA audio input iacks.
20. OUTPUT L/R: left and right RCA audio output iacks
8. DC 12 V: DC input iack for AC adapter
9 .
RF section is modulated automatically by an AGC circuit.
10. Chorging pins (see flg. 2)

6 Operating Notes

Connect the cable on the supplied AC adapter to the DC 12 V iack (8) on the transmitter rear Panel as shown in fig. 3.
it is, connec? the AC adapter to a convenient AC outlet (see fig. 4).
1. Before connecting the transmitter to your audio Source, switch the audio Source OFF.
2. Referring to fig. 5, plug the red RCA connector [right channel) on the supplied iack cable lnto the red INPUT R socket (7) and
the white RCA connector (IeFt channei) into the white INPUT t socket (7) on *he transmitter rear Panel.
3. Connect the stereo mini iack plug of the iack cable to the headphones outptit of your audio Source (refer to fig. 6).
4.
cable. Connect the adapter iack to the headphones output.
1.
2.
13