Install The Hardware - Axis T92E Serie Installationsanleitung

Weight

Install the Hardware

NO TICE TICE
NO NO TICE
• Due to local regulations or the environmental and electrical conditions in which the
product is to be used, a shielded network cable (STP) may be appropriate or required.
All cables connecting the product to the network and that are routed outdoors or in
demanding electrical environments shall be intended for their specific use. Make sure that
the network devices are installed in accordance with the manufacturer's instructions.
(AXIS T92E05) For information about regulatory requirements, see the camera's
Installation Guide.
AXIS T92E20) For information about regulatory requirements, see Regulatory
Information 2
• Be careful not to scratch, damage or leave fingerprints on the window because this could
decrease image quality.
The Axis product can be installed with the cables routed through or along the wall.
Read all the instructions before installing the product:
1. Install the wall mount. See Install the Wall Mount on page 11. For detailed instructions,
see the wall mount's Installation Guide, supplied in the package or available on
www.axis.com
2. Attach the housing to the wall mount. See Attach the Housing to the Wall Mount on
page 12.
3. Install the camera in the housing. See Install the Camera in the Housing on page 14.
Install the Wall Mount
CAUTION
Make sure that the screws and plugs are appropriate for the material (e.g. wood, metal,
drywall, stone) and that the material is strong enough to support the combined weight
of the camera, housing, and wall mount.
Note
• See also the wall mount's Installation Guide supplied in the package and available on
www.axis.com
• For technical specifications about the connectors, see the camera's User Manual available
on www.axis.com
AXIS T92E Housing Series
AXIS T92E05: 2.4 kg (5.1 lb.)
AXIS T92E20: 2.5 kg (5.5 lb.)
11