Herunterladen Diese Seite drucken
GWINNER STYLE RG1 Montage

GWINNER STYLE RG1 Montage

Regal

Werbung

Montage STYLE Regal RG1
Assembling STYLE shelf RG1
Montage étagère RG1 STYLE
Bild 1
Image 1
Image 1
Die mitgelieferten Dübel sind für folgende Untergründe geeignet: Beton, Vollsteine, Lochsteine,
Hohlblocksteine. Bei abweichendem Untergrund ist das Befestigungsmaterial entsprechend auszuwählen.
The wall plugs supplied are suitable for the following sub-surfaces: Concrete, solid brick, ventilating brick,
hollow concrete blocks. If there is a different subsurface, select an appropriate fixing material.
Les chevilles comprises dans la livraison sont adapptées aux supports suivanzs: béton, brique, pleine, pierre
percée, parpaing creux. En cas d'écart avec le support, veuillez sélectionner le matériau de fixation
correspondant.
Bei nicht vorschriftsmäßiger und/oder nicht fachgerechter Montage wird bei Personen-
und Sachschäden keinerlei Haftung übernommen!
No liability shall be assumed in the event of personal or material injury arising from improper and/or
incorrect assembly.
Nous déclions toute responsabilité en cas de dommages corporels et matériels occasionnés par un
montage non conforme aux instructions et/ou non exécuté dans les régles!
Montage STYLE Regal RG1_DE_EN_FR.xlsx
10.10.2019/EFF
qualifiziertes Fachpersonal
Qualifed specialist personnel
Personnel spécialisé qualifié
Seite 1/2

Werbung

loading

Inhaltszusammenfassung für GWINNER STYLE RG1

  • Seite 1 Montage STYLE Regal RG1 Assembling STYLE shelf RG1 Montage étagère RG1 STYLE Bild 1 qualifiziertes Fachpersonal Image 1 Qualifed specialist personnel Image 1 Personnel spécialisé qualifié Die mitgelieferten Dübel sind für folgende Untergründe geeignet: Beton, Vollsteine, Lochsteine, Hohlblocksteine. Bei abweichendem Untergrund ist das Befestigungsmaterial entsprechend auszuwählen. The wall plugs supplied are suitable for the following sub-surfaces: Concrete, solid brick, ventilating brick, hollow concrete blocks.
  • Seite 2 Bild 2, RG1 bohren Bild 3, Distanzleiste Image 2, Drilling RG1 Image 3, spacer bar Image 2, percer RG1 Image 3, barre d'écartement Dübel 8mm bohren und Wandhaken eindrehen. Drill an 8mm hole for the dovel and screw in the wall hook. Percez un trou de 8 mm pour le cheville et tourner dans le crochet mural.